Table of Contents
Advertisement
Features and Controls
Grid Guide
The Grid Guide appears each time you enter the GUIDE Plus+ menu
system. It displays the current programming for each channel. The live
program is displayed in the video window.
•
Use the up and down arrows to browse channel listings and CH ^/v
to page through listings. Use the right and left arrows to browse
future program listings.
•
To tune to a channel, highlight the program you want to view in the
channel listing and press OK. Press CLEAR to exit the GUIDE Plus+
system and return to the original channel. Press GUIDE to exit the
GUIDE Plus+ system and tune to the channel in the view window.
Grid Guide Action Buttons
Action buttons will change according to where you are in the GUIDE
Plus+ system. Be sure to look at the action bar before pressing the
command numbers.
When highlighting the Channel listings, the following Action buttons
are available on the bar:
•
Watch Press 1 on the remote to place a timer in the Schedule for
the TV to turn on and tune to the program highlighted in the
Channel listing. When the TV turns on, the GUIDE Plus+ system will
automatically appear with the scheduled program highlighted and
tuned in the View window so long as Autodisplay is enabled.
•
Record Press 3 on the remote to place a timer in the Schedule for
the VCR to record the program highlighted in the Channel listing. If
you have a cable box, changing channels on the TV will not cause
the cable box channel to change while recording.
The Program information window will display a confirmation when you
have successfully created a timer to watch or record. If you have selected
two programs to watch or record which begin at the same time or
overlap, you will receive a timer conflict message. The GUIDE Plus+
system will not schedule a conflicting timer, therefore you must choose
between the two programs.
When highlighting the Channel names (the left column on the Channel
listing), the following Action button is available on the bar:
•
Lock/Unlock
Press 1 to lock or unlock the video window to
either stay at one channel as you browse the GUIDE Plus+ system
(lock) or change as you browse through different channels (unlock).
The PIP button on the remote also toggles between the locked and
unlocked states.
40
GUIDE Plus+ screens illustrated in this
book are representations of what you are
likely to see. Not all channels, programs,
and GUIDE Plus+ information depicted
will be available in your area.
New features and options can be
downloaded to the GUIDE Plus+ system,
so these too are subject to change.
Grid Guide
Action Buttons
VCR1
ON OFF
DVD
VCR2
AUX
MUTE
Action Button
SOUND
c o m m a n d
GUIDE
numbers
OK
MENU
2
1
4
5
7
8
WHO INPUT
0
REVERSE
PLAY
REC•VCR+
STOP
PIP
SWAP
CH CTRL
Grid Guide
M e n u
Selection
TV
SAT CABLE
SKIP
GO BACK
INFO
CLEAR
3
6
9
ANTENNA
FORWARD
PAUSE
RESET
Advertisement
Table of Contents
