TaoTronics TT-BH041 - Wireless Mono Headset User Guide

Table of Contents

Contents

1 Product Diagram
2 Package Contents
3 How to Use
4 Button Control
5 Documents / Resources
- 5.1 Download manual

Product Diagram

Flexible Headband
Volume +
Volume -
LED Indicator
Multifunction Button
Micro-USB Charging Port
Microphone

Package Contents

1 x TaoTronics Wireless Mono Headset (TT-BH041)
1 x Micro-USB Charging Cable
1 x User Guide

How to Use

Charging

Connect the charging port with any USB charging adapter or active computer USB port.
Charging will start automatically with the LED indicator turning red.
The headset is fully charged when the LED indicator turns off.

Pairing

Make sure the headset and your Bluetooth® device are next to each other (within 3 feet / 1 meter).
When the headset is off, press and hold the Multifunction Button for 2 seconds to bring the headset into pairing mode with the LED indicator flashing blue and red alternately.
Activate Bluetooth® on your phone and search for nearby Bluetooth® connections.
Find "TaoTronics TT-BH041" in the search results. Tap on the name to connect. Once connected, the LED indicator will flash blue once every 5 seconds.

warning Note:
Automatic Re-pairing: The Bluetooth® headset can remember devices paired previously. You may simply turn on the headset and the device (with Bluetooth activated), and they will connect to the last connected device automatically without going into the pairing mode.

Clear Pairing History

If the headset fails to pair with your Bluetooth® device clear the pairing history by pressing and holding the Multifunction and Volume - Buttons simultaneously when the headset is on until the LED indicator flashes red and blue at the same time indicating clearing successfully. Then re-pair your Bluetooth® device as instructed in Pairing.
If you want to pair the headset with another device when already paired, deactivate the Bluetooth® function on the paired device or remove "TaoTronics TT-BH041" from the Bluetooth list.

Button Control

Function	Operation
Power On/Off	Press and hold the Multifunction Button for 2 seconds
Redial	Press the Multifunction Button twice
Voice Control	Press and hold the Multifunction Button for 1 second
Answer Calls	When there is an incoming call, press the Multifunction Button once
Reject Calls	When there is an incoming call, press and hold the Multifunction Button for 1 second
End Calls	During a call, press the Multifunction Button once
Mute Calls	During a call, press the Microphone Button once. Press again to normal calls
Transfer Calls	During a call, press and hold the Multifunction Button for 1 second to transfer the call between the phone and the headset
Second Call	When there is a second incoming call (B) in the course of an ongoing call (A), Press the Multifunction Button once to answer B and hang up A Press the Multifunction Button twice to answer B and on-hold A Press and hold the Multifunction Button for 2 seconds to reject B During a second call, press the Multifunction Button twice to transfer calls between A and B
Volume + / -	Press the Volume + / - Button
Previous / Next Track	Press and hold the Volume - / + Button for 1 second
Pause / Play	Press the Multifunction Button