EarthWise LBVM2202 Owner's Manual page 4

Cordless 40 volt(2 x 20 volt) blower/ vacuum/ mulcher / lithium-ion battery pack
Table of Contents

Advertisement

Available languages

Available languages

3
4
ATTACHING THE TRANSPORT WHEEL ( Fig. 5)
Place the transport wheel over the bottom vacuum/blow tube and
push it up to the marked stop.
Fix the transport wheel with the screw.
5
ATTACHING THE DEFLECTOR TUBE ( Fig. 6)
Press the deflector tube onto the housing with the opening facing
forwards.
6
ASSEMBLY
ATTACHING THE VACUUM BAG ( Fig. 7)
Hook the front part of the vacuum bag adapter onto the
connecting piece of the housing.
Press the rear part of the vacuum bag adapter onto the
connecting piece of the housing until it audibly latches in.
Attach the vacuum bag to the fastening hook.
7
FIXING THE CARRYING BELT ( Fig. 8 )
Attach the carrying belt to the fastening point provided.
NOTE: For safety reasons only carry the device supported over your
shoulder and never around your neck.
8
ADJUSTING THE CARRYING BELT ( Fig. 9 )
Shut the belt closure
Adjust the carrying belt to the desired length. The attachment
hook should be at hip height.
9
INSTALLING AND REMOVING BATTERY PACKS FROM THE UNIT
Slide the battery packs in
your blower (see picture).
Ensure the two batteries
are securely connected to
blower. To remove
batteries, depress release
buttons and slide battery
packs out of tool.
4
LBVM2202

Advertisement

Table of Contents
loading

Table of Contents