LG WD-14101FD Owner's Manual page 19

Table of Contents

Advertisement

H
ow to use washer
Time Delay
Coloureds
Wash
Rinse
Spin
Temp
Option Time Delay Reset
1. Time Delay
Preparing washing before starting "Time Delay."
- Turn on the water tap.
- Load laundry and close the door.
- Place the detergent and fabric softener in the
drawer.
• How to set "Time Delay"
1. Press Power(
) button.
2. Rotate the Program Dial button to select
the program or course (option) you require.
3. Press the Time Delay button.
4. Press the Time Delay button or rotate the
Program Dial button to set the desired
time.
5. Press the Start/Pause(
("
" blinks.)
• If Time Delay button is pressed, "3:00" is
displayed. The maximum delayed time is
24:00 hours and the minimum time is 3:00
hours.
• Each pressing of the Time Delay button
advances time on delay by one hour.
• To cancel the time delay, press the
Power(
) or Reset button.
• Time delay is 'expected time' from the present
to the completion of washing cycle or selected
process (Wash, Rinse, Spin).
• According to the condition of water supply and
temperature, the delayed time and the actual
washing time may vary.
48
16
Time left
hrs
Option
Finish after
16
hours
Help
) button.
Display
1. Washer process display
• Displayed washer process with words
and animations.
• Each course, word background gets
darker and current process animation
gets lighter.
• When touching the button, screen gets
lighter and darker in about 3 minutes.
2. Special function display
• When Child lock is selected, the
"
" is displayed.
• When time delay is selected, it shows
the remaining times to finish the selected
program.
3. Self diagnose display
• If the washer encounters a fault during
operation, the associated fault will be
displayed.
"
" : Water inlet trouble
"
" : Drainage trouble
"
" : Unbalanced load
"
" : Door is not closed
"
" : Water temperature trouble
"
" : Problem of overfilling water
"
" : Water pressure sencing error
"
" : Over load in motor
"
" : Over load in motor
If these error letters are displayed, please
refer to the troubleshooting page53 and
follow the guide.

Advertisement

Table of Contents
loading

Table of Contents