LG LDT7808 Series Service Manual page 31

2-1. Front Cover Assembly
CAUTION
Ha rness
te nsion
All manuals and user guides at all-guides.com
※ For models:
① Open the door.
② Remove the 6 screws around front cover
※ For models:
① Open the door.
② Remove the 10 screws around front cover
Actuator
Dispenser
Case 1: The wire harness becomes disconnected.
Housing
Case 2: The dispenser actuator is rotated but
Case 3: The dispenser actuator is pulled out or
Indicator PCB
③ Remove the wire connection.
④ Remove the Indicator PCB.
- 31 -
For Authorized Service Technicians
LUDP8997**
LDP6797**
LDP5676**
LDF5545**
assembly.
LDT7797**
LDT5665**
LSDF9897**
LDT7808**, LSDT9908**
assembly.
CAUTION:
Take care when disassembling the front
cover to avoid putting stress on the wire
harness and dispenser actuator between
the front cover and the dispenser.Doing
so may disconnect the wire harness or
dislodge or damage the dispenser actuator.
SOLUTION
→ Reconnect the wire harness
not pulled out or damaged.
→ Reposition the dispenser actuator
properly and continue service.
damaged.
→ Replace the casing: asm
(ABT73009401 / K110)