Table of Contents
Advertisement
Using the TV's Features
Channel 2, 3 or 4 Antenna Input
TV, and you want the TV to tune to channel 2, 3, or 4 when you press the corresponding button on the remote.
Reminder: make sure the component's Channel 2/3 or 3/4 switch is set to match the channel you choose in
Auto Tuning.
Component is connected to the Input 1 or 3 Video (V) or S-VIDEO jack on the back of the TV
Input 1, Input 3
and you want the TV to tune to the Video Input Channel when you press the corresponding button.
Input 2, Input 4 Compatible video source, such as a DVD player or satellite receiver, is connected to the
Input 2 or 4 COMPONENT/COMPOSITE INPUT jacks (Y/Video, Pb, Pr) on the back of the TV and you want the
TV to tune to the composite/component video input when you press the corresponding button.
Front Input Component is connected to the S-VIDEO IN or VIDEO IN jack on the front of the TV and you want the
TV to tune to the front Video Input Channel when you press the corresponding button.
HDMI Component is connected to the HDMI/DVI jack on the back of the TV and you want the TV to tune to
this input when you press the corresponding button.
PIP (Picture-in-Picture) Operation
The PIP (Picture-In-Picture) feature lets you display a second, smaller analog (NTSC format) picture on top of
the main analog picture. You will only be able to use the PIP window and main picture with analog channels
and inputs; PIP doesn't support digital signals. The main and PIP channels must be from different tuners or
inputs; for example, main is from INPUT 1 and PIP is from ANTENNA INPUT. If you are only using tuners for
PIP and main, you must have the main picture from CABLE INPUT and the PIP picture from ANTENNA INPUT,
or vice-versa.
PIP
PIP
buttons
CC
CC
CC
CLEAR
C C
Arrow
buttons
SOUND
Tip
If you want to go directly to an input or channel in PIP
(or main), set up auto tuning and press the component
button (VCR, DVD, etc.).
Main picture
channel
number
Channel
control
indicator
44
Component is connected to the ANTENNA INPUT jack on the back of the
SWAP
CH. CTRL
FREEZE
PRESETS
FAV
LIGHT
FORMAT
INFO
i
MENU
M M
SKIP
Program Title/Acquiring Channel
Ch 8-1 WLPJ
Listening to English in SRS
PIP Ch 8
PIP channel number
PIP Buttons
There are certain remote buttons that control the way the PIP window
works:
PIP Brings up the PIP window. Press PIP again to remove the window.
Arrows Let you move the PIP window to different areas of the screen.
SWAP Switches the video from the PIP window to the main picture.
FREEZE Freezes entire screen, including the main picture and PIP
window, if PIP is displayed.
CH CTRL (Channel Control) Lets you switch channel control between
the PIP window and the main picture. To determine whether you are
controlling the PIP or the main picture, look at the channel banner as you
change channels or press the INFO button. The triangular indicator ( )
beside the channel number lets you know which picture you're
controlling with channel up/down, number buttons, etc.
MPAA - Not Rated
Unrated
00:30
12:30 AM
12:39 PM
Antenna Input
4:3 Normal 480i SD
Cable Input
Chapter 3
Advertisement
Table of Contents
