Polygroup TG76M6010M00 Assembly Instructions

TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
technology which takes less than 10 minutes to set up and light up!
Carefully follow the instructions below on how to assemble your new tree quickly and at ease:
1. Choose an appropriate location near a wall outlet.
2. Assemble the tree stand (Fig. A) and place on a level surface.
Fig. A - Tree Stand Assembly
Fig. B – Tree and Light Assembly
Section 2
Section 1
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Remove protective cap, and insert the pole of
Section 1 into the assembled stand . Insert the pole of Section 2 into Section 1. Insert the pole of
the tree top into Section 2. Ensure that all poles are firmly secure. Be sure that all wires are free of
branch hinges.
5. Insert green label plug into the wall outlet (Fig. B). Your entire tree should now be lit.
6. Shape the tree from the bottom to the top. Start with the branches farthest from the pole – fan out
in a star shape (Fig. C), and continue until the entire tree is shaped.
Fig. C
Top view
7. Slightly upsweep all tips for a fuller, uniform look. Shift branches to fill in any gaps. Your Christmas
tree is now ready to be decorated.
MODEL #: TG76M6010M00
Polygroup®!
Click
Tree Top
Side view
2019 TREE LETTER "H"
Sku # 5068846
This tree comes with Quick Set®
Pull apart tree stand legs until they
snap and form an 'X' shape.
To close the stand, press the metal
button and fold the legs together.
*Electrical Rating For The Tree
(For Indoor Use Only)
2.38A 120V 60Hz
Do Not Tamper
Internal Parts
Open the
protective
cap
Do Not Tamper
Internal Parts
Open the
protective
cap
Insert Green
Label Plug Into
Wall Outlet