LG ET96 Series Installation Manual page 32

32
Radio Name Display
• Instead of "Audio Only", the name of a radio programme is displayed on the screen when a radio broadcast is playing.
• If the setting is "On", the name of a radio programme is displayed for the radio programme.
• If the setting is "Off", the text "Audio Only" is displayed for the radio programme.
USB Auto Playback
(Depending on model)
• When 'USB Auto Playback' is set to 'Movie' , TV finds and plays the USB' s movie files located at the root(top) directory Movies if USB is plugged in.
• When 'USB Auto Playback' is set to 'Photo' , TV finds and plays the USB' s photo files located at the root(top) directory Photos if USB is plugged in.
• If it reaches the last file, it starts the first file again
Teletext
(Depending on model)
• If set to On, the teletext mode stays enabled even when the programme signal disappears on the teletext screen.
• If set to Auto, the teletext mode is disabled when the programme signal disappears on the teletext screen.
15Min Auto Off
• When set to 'Enable' , TV will turn off if there is no signal in 15Min.
DVB-C
(Depending on model)
• DVB-T/C programmes are searchable and selectable like following if DVB-C is "Enable".
DVB-C Bandwidth
(Depending on model)
• If country is 'Philippines' , 'DVB-C Bandwidth' menu will be shown.
• Select the bandwidth of cable tuning (6 Mhz/8 Mhz). The default is 6 Mhz.
Additional Pixel Refresher
(Depending on model)
• If set to Power Plug In, TV always does pixel refresh when AC power on.
• If set to Off, TV does pixel refresh on time.
Auto Sensing
• If 'Auto Sensing' is set to 'On' , the input is automatically switched when the input signal that you set to "ON' is received.
• If 'Auto Sensing' is set to 'Disable' , the input is not switched when the input signal is received.
- SIMPLINK and Auto Sensing cannot work simultaneously. If SIMPLINK is set to On, Auto Sensing is automatically set to Disable.
- If the signal is removed while Auto Sensing (automatic input switch) is enabled, the input returns to the previous setting.
If the several input are connected by enabling Auto Sensing and the automatic input returns to the previous setting.
If the several inputs are connected by enabling Auto Sensing and the automatic input switch is performed several times, the input
returns to the previous setting only for the last input and does not repeat the operation for the rest.