Daniamant Dan WL3-1 Installation And Maintenance Instructions

Lifejacket light

Advertisement

Description

The Dan WL3-1 is a flashing lifejacket light which is activated by a water sensor
attached to the cable or manually using the on/off button.
The light is designed to be fitted by the lifejacket owner.
Daniamant A/S
Industrivej 24C
DK-3550, Slangerup, Denmark
Tel: +45 47 37 38 00 Fax: +45 47 37 38 09
Email: orders@daniamant.com
www.daniamant.com
WL3-1 Instruction Issue 7 (D0000)
www.daniamant.com
Dan WL3-1 lifejacket light
Installation and Maintenance Instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Dan WL3-1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Daniamant Dan WL3-1

  • Page 1 Installation and Maintenance Instructions Description The Dan WL3-1 is a flashing lifejacket light which is activated by a water sensor attached to the cable or manually using the on/off button. The light is designed to be fitted by the lifejacket owner.
  • Page 2 Clip part no.1960 Operation The DAN WL3-1 is switched on automatically when the sensor is immersed in water and can be switched off by pressing the on/off button. The light can also be activated and deactivated manually by pressing the on/off button.
  • Page 3 It is recommended that the light is activated for 1 minute. Replacement The Dan WL3-1 lifejacket lights have a storage life of 5 years and must be replaced by the date shown on the label. Health and safety information Dan WL3-1 lights contain Lithium cells.
  • Page 4 To ensure compliance with the WEEE and Battery Regulations, the Survivor Location Lights placed on the market in the UK or Denmark should be returned to Daniamant in the UK or Denmark, or deposited in your nearest WEEE Designated Collection Facility, operated by your Local Authority.

Table of Contents