Page 1
LJ1 Lifejacket Light Installation and Maintenance Instructions Description The LJ1 Lifejacket Light is a manually-activated 2-part light. Daniamant Limited Unit 3, The Admiral Park, Airport Service Road, Portsmouth, UK PO3 5RQ Telephone: +44 (0)23 9267 5100 Facsimile: +44 (0)23 9267 5101 www.daniamant.com...
Page 2
Operation The LJ1 is activated either by a snatch pull on the toggle, or by pressing the switch at the top of the battery unit. Maintenance Routine service The LJ1 is maintenance free; an annual check is recommended: 1. Visually inspect the unit for deterioration or damage. Check that the tamper seal is intact.
Page 3
Testing and switch activation Light may be activated by either: 1. A snatch pull on the cord 2. Pressing switch To test, insert test probe in hole and push down until lamp illuminates.
Page 4
To ensure compliance with the WEEE and Battery Regulations, the Survivor Lo- cation Lights placed on the market in the UK or Denmark should be returned to Daniamant in the UK or Denmark, or deposited in your nearest WEEE Designated Collection Facility, operated by your Local Authority.
Need help?
Do you have a question about the LJ1 and is the answer not in the manual?
Questions and answers