Sanyo CE21DN9-B Instruction Manual page 2

Table of Contents

Advertisement

CAUTION: Please read and retain for your safety. This unit has been engineered and manufactured to assure your personal safety.
But improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this receiver
observe the following basic rules for its installation, use and servicing.
Installation
Do not allow anything to rest on the power cord. Do not locate
this television receiver where the cord will be damaged by
people walking on it.
Do not overload wall outlets and extension cords as this can
result in fire or electric shock.
Slots and openings in the cabinet and in the back or bottom are
provided for ventilation to ensure reliable operation and to pro-
tect it from overheating. These openings must not be blocked or
covered. The opening should never be covered with a cloth or
other material, and the bottom openings should not be blocked
by placing the television receiver on a bed, sofa, rug, or other
similar surface. This television receiver should never be placed
near or over a radiator or heater.
Do not place your television receiver on an unstable stand, shelf
or table. Serious injury to an individual, and damage to the
television may result if it should fall. Your sales person can
recommend approved stands or shelf and wall mounting
instructions.
This television receiver should not be placed in a built-in
installation such as a bookcase unless proper ventilation is
provided.
MINIMUM DISTANCES
10cm
10cm
20cm
If the television is built into a unit, or enclosed, the minimum
distances for ventilation must be maintained. Heat build up can
reduce the life of your television, and can be dangerous.
Servicing
Your television is fully transistorised and does not contain any
user serviceable components.
You must not remove the rear cover of the TV by yourself. The
apparatus is working with high voltages and could damage
objects or even endanger people. Leave all required repair and
service jobs to an authorised service technician. He will exclu-
sively use such spare parts that are complying with the same
safety standards as applicable to the original parts. The use of
original spare parts can prevent fire, shock and other hazards.
Unplug the television receiver from the wall outlet and refer
servicing to qualified service personnel under the following
conditions:
If the power cord or plug is damaged.
If liquid has been spilt into the television
receiver.
If television receiver has been exposed to rain or water.
If the television receiver has been dropped or the cabinet has
been damaged.
If the television receiver exhibits a distinct change in performance.
If the television receiver does not operate normally by following
the operating instructions.
Adjust only those controls that are covered in the operating instruc-
tions as improper adjustment of other controls may result in damage.
This will often require extensive work by a qualified technician to
restore the television receiver to normal operation.
2
SAFETY
SAFETY
5cm
!
PRECAUTIONS
PRECAUTIONS
This television receiver should be operated only from the type of
power source indicated on the television or as indicated in the
Operating Instructions. If you are not sure of the type of power
supply in your home, consult your sales person or your local
power company.
Never add accessories that have not been specifically designed
for this television.
Do not expose the television receiver to rain or use near water.
For example, near a bathtub, kitchen sink, in a wet basement,
etc. Before cleaning, unplug the television receiver from the wall
socket.
Important:
This equipment is fitted with an approved non rewireable UK mains
plug. To change a fuse in this type of plug proceed as follows:
1. Remove the fuse cover and fuse.
2. Fit a new fuse which should be a BS1362 5Amp A.S.T.A. or BSI
approved type.
3. Ensure that the fuse cover is correctly refitted.
If the fuse cover is lost or damaged the plug must NOT be used but
replaced with a serviceable plug.
If the fitted plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place. If the mains plug
contains a fuse, this should have a rating of 5 Amp, ensure the fuse
cover is correctly fitted. If a plug without a fuse is used, the fuse at
the distribution board should not be greater than 5 Amp.
Note:
The severed plug must be destroyed to avoid a possible
shock hazard should it be inserted into a 13Amp socket elsewhere.
The wires in this mains lead are coloured in accordance with the
following code:
Blue -------> Neutral
Brown ----> Live
1. The Blue wire must be connected to the terminal which is
marked with the letter "N" or coloured BLACK.
2. The Brown wire must be connected to the terminal with the
letter "L" or coloured RED.
3. Do not connect either wire to the earth terminal in the symbol
or coloured GREEN or GREEN and YELLOW.
Before replacing the plug cover, make certain that the cord grip is
clamped over the sheath of the lead - not simply over the wires.
Use
Do not drop or push objects into the
television cabinet slots or openings. Some
internal parts carry hazardous voltages and
contact may result in an electric shock
hazard. Never spill liquids of any kind on
the television receiver. Do not place items
such as vases containing liquid on top of
the TV set.
Never stand on, lean on or push the
television or its stand. Never allow children
to play with the television or its stand.
Serious injury may result if it should fall.
Do not apply liquid cleaners or aerosol
cleaners directly onto the television receiv-
er. Use a damp cloth for cleaning.
Do not place candles or hot objects upon
the TV, next to it or behind it. Open flames
must never be used near the TV set.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ce25dn9-b

Table of Contents