Important Safety Instructions - RCA D52W26 User Manual

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
If an outside antenna is connected to the TV receiver, be sure the antenna system is
grounded so as to provide some protection against voltage surges and built up static
charges. In the U.S. Section 810-21 of the National Electrical Code and in Canada, Part 1 of
the Canadian Electrical Code provides information with respect to proper grounding of the
antenna system. See the figure on the right for details.
To assure adequate ventilation for this product, maintain a spacing
of 4 inches from the top and sides of the TV receiver and 2 inches
from the rear of the TV receiver and other surfaces.
Important Information
Example of Antenna Grounding as per
(NEC) National Electrical Code
�� ������� �� ��
� �� �� ������� ����
�������� ��� ������� �����
� ������ ��
�� �� ��� ����� �� ��
�� �� �� ���� �� ��� ��� ���
��� �� ��
�� �����
����
��������� �� �
� �� � �� �
�� � � �� ��� �� �� �
� �� � �� � � � � �� �� � � �� � �
���� �������� ����� ���
���� ���� �� ����� ���� �
1