Table of Contents
Advertisement
2. To turn on the camera. Slide the
shutter to the right to turn on
the camera for use with the Hello
webcam 5M software. To turn off the
camera. Side the shutter to the left
to turn off the camera and cover the
lens. Closing the camera shutter does
not turn off the microphone. The
camera and microphone are separate
devices. The microphone can be used
without using the camera. To turn off
the microphone. Go to the settings
of your video conferencing software
and disconnect the microphone or in
the operating system.
3. Different regions have different
voltages, with inconsistent voltage
setting may cause water ripple when
using this webcam. Please make the
voltage setting same as the voltage
of your region.
4. Users can adjust the following menu
to select the screen suitable for the
visual effect.(Example: Users can
adjust the value of White Balance)
2.4 Noise Cancelling
(27E1N5600HE)
This monitor has Noise Cancelling
functionality. When connected via
USB-C during video conferencing, the
monitor will automatically filter for
human sounds. This function can be
turned off in the OSD menu, under Noise
Cancelling (default=ON).
Note
If multiple devices are connected to
the display, both may play through
the speaker at the same time. It is
recommended to disable the audio
output of the non-primary device.
14
Advertisement
Table of Contents
