Table of Contents
Advertisement
���������
�����
����
�
�
�
�
�
�
�
����������������
�������
�
�
�
�
�
�
�
��������
�
Chapter 1
COMPONENT INPUT Lets you connect a component video source, such as a DVD
player.
•
CMP1 Y PB PR (Component Video) Provides optimum picture quality because
the video is separated into three signals. Use three video-grade cables for the
connection. When using CMP1 Y PB PR, make sure to connect left and right audio
cables to the CMP1 L and R Audio Input jacks.
•
CMP1 L (Audio) Provides left audio connection. The left audio connector is
usually white.
•
CMP1 R (Audio) Provides right audio connection. The right audio connector is
usually red.
Note: Model D30W750T has an extra set of component video input jacks,
labelled CMP2.
COMPOSITE INPUTS Lets you connect another component such as a VCR, DVD
player, or laserdisc player. Its AUDIO jacks are the same as described for CMP1 above.
����
•
VID1 S-VIDEO Provides better picture quality than the video jacks (VID1 and 2
Video) because the color part of the picture is separated from the black and white
����
part of the picture. When using VID1 S-VIDEO, make sure to connect left and right
audio cables to the VID1 L/MONO and R Audio Input jacks.
•
VID1 V (Video) Provides composite video connection. The video connector is
usually yellow.
•
VID2 S-VIDEO, V and L/MONO and R Audio Allows you to connect a
component such as a VCR, DVD player, or laserdisc player. Their description is
the same as VID1 above.
Note: For each VID jack group (VID1 and VID2), you may connect either an S-
Video or Video cable. Do not connect both at the same time in either of the VID
jack groups.
DVI-HDTV Input Lets you connect an HDTV Tuner with a DVI output.
•
DVI (Digital Visual Interface) Provides an uncompressed, digital video interface
developed for high-bandwidth digital connection. It supports the overlay of high-
resolution graphics needed by some electronic program guide navigation and other
interactive services. DVI, when combined with HDCP (High bandwidth Digital
Content Protection) technology, creates a protected digital connection. The DVI-
HDTV connection is designed to display either progressive scan (480p) or HDTV
(1080i) signals at a bandwidth of up to 1.78 Gigabits per second.
•
L (Audio) Provides left audio connection when using the DVI jack. The left audio
connector is usually white.
•
R (Audio) Provides right audio connection when using the DVI jack. The right
audio connector is usually red.
Note: Remember to connect the left and right audio cables because the DVI
cable carries only the picture signal, not the sound.
Connections & Setup
13
Advertisement
Table of Contents
