Advertisement
CARE AND MAINTENANCE
CLEANING THE CONDENSER COIL
for efficient operation, it is important that
Figure 4
the condenser surface be kept free of dust,
dirt, and lint. It is recommended to clean the
condenser coil and the fins at least once per
month.
To access the condenser, lift up on the cover
Lift up this cover
with the control panel on the front of the unit
and carefully pull it off the body of the unit.
(See figure 4.)
Use a commercial condenser coil cleaner,
available from any kitchen equipment retailer.
Brush the condenser fins from top to bottom,
not side to side. After cleaning, straighten any
bent condenser fins with a fin comb.
CLEANING THE FAN BLADES AND MOTOR
If necessary, clean the fan blades and motor with a soft cloth. If it is necessary to wash the fan blades,
cover the fan motor to prevent moisture damage.
CLEANING THE INTERIOR
When cleaning the cabinet interior, use warm water and mild soap. DO NOT use steel wool, abrasive
cleaners, caustic soap or bleach as those may damage the surfaces.
Door gaskets should be washed on a weekly basis. Simply remove the door gasket from the frame of the
door, soak in warm water and soap for 30 minutes, dry with a soft cloth, and replace on the door. Be sure
to check that they are properly sealing after they are replaced.
Periodically remove the shelves and pilasters from the unit and clean them with mild soap and warm
water. To remove the pilasters, first remove the shelves and shelf brackets, and then simply lift the pilaster
up and out.
:
WARNING
ALWAYS disconnect the power cord before cleaning any parts of the unit.
8
Advertisement
