Mobital THE W DIN TABLE Assembly Instructions

GENERAL NOTE: CAREFULLY REMOVE ALL WRAPPING MATERIALS AND ENSURE ALL PARTS
ARE ACCOUNTED FOR. ASSEMBLE ON A CLEAN FLAT SURFACE TO AVOID SCRATCHES. DO NOT
DISCARD THE PACKAGING UNTIL ITEM IS FULLY ASSEMBLED.
1. Follow each step of instructions in the correct order, if not, assembly difficulties will occur and can result in injury and/or
damage to the product.
2. For your safety, assembly by two (2) people is highly recommended.
3. Use the parts and hardware list below to identify and separate each of the pieces included.
4. Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause the bolts to misalign
during assembly.
5. If using power tools to aid in assembly, please use caution. Power tools can damage the hardware and/or the product itself,
which will void the warranty.
6. For the hydraulic system to work safely and properly, complete the bed with a mattress weighing maximum 220 lbs.
Attention: Do not tighten all screw & bolt
until all the leg is fully assembly
ASSEMBLE KING SIZE SPRING FRAME FIRST BEFORE STORAGE BED ASSEMBLY.
ONCE YOU HAVE A COMPLETED ASSEMBLY OF THE SPRING FRAME, PUT IT ASIDE
AND BEGIN THE ASSEMBLY OF THE STORAGE BED.
(KING SIZE - SPRING FRAME) HARDWARE LIST
ITEM QTY
A 4
B 2
C 2
D 1
E 1
+
T O O L S N E E D E D
ASSEMBLY INSTRUCTIONS
DESCRIPTION
M8 - 40MM
M8 - 80MM
Connector Tube
Bed Slat Left
Bed Slat Right
Completed Assembly
ITEM:
Attention: Do not tighten all screw & bolt
until all the leg is fully assembly
IMAGE
LUNAR KING SP THE W
ITEM: THE W
*
SPRING FRAME
DIN TABLE
(LONG) DIN TABLE