Cabling Examples - Paradyne ACCULINK 3170 E1 DSU/CSU Quick Reference

Cabling Examples

The E1 DSU/CSU is supplied with an ac power module. You must provide the DTE and
network cables.
Optional cables that you can order from the company are described in Appendix D, Pin
Assignments .
NOTE:
The 120Ω / 75Ω switch selects either the 120-ohm balanced network interface or
the 75-ohm unbalanced network interface. The RX SHIELD switch selects either an
"open" or "earth" shield connection for the 75-ohm RX interface. (This switch must
be set to "open" when using the 120-ohm interface.)
COM PORT NETWORK
AUX COM
POWER PORT PORT
DTE
CAUTION: AUX PORT OR COM PORT MUST NOT BE
CONNECTED TO PSTN OR E1 NETWORK
CLOCK IN PORT 1
SERIAL
PORT
TO AC
POWER
MODULE
NOTE:
3100 SERIES
FRONT PANEL
EMULATION
SOFTWARE,
3100-C1-010
NETWORK
NETWORK
TX RX
RX SHIELD
120ý OPEN
75ý EARTH
120ý 75ý 75ý
PORT 2
DSU/CSU
NETWORK
TO DC
POWER
3100-F1-520
(OPTIONAL)
SNMP
MANAGER
3
COM PORT
AUX COM
POWER PORT PORT
DTE
120ý
CAUTION: AUX PORT OR COM PORT MUST NOT BE
PORT 3
CONNECTED TO PSTN OR E1 NETWORK
CLOCK IN PORT 1
OR
FRONT
PANEL
DSU/CSU
NETWORK
NETWORK
TX RX
RX SHIELD
120ý OPEN
75ý EARTH
75ý 75ý
PORT 4
PORT 2
DSU/CSU
98-14673a