NEC MT Series Quick Connect Manual

Quick Connect Guide
Step1
Connect the supplied power cable.
US
B
Connect the supplied 15pin-15pin signal cable.
Step2
Always power down
before you hook up.
MOUSE
REMOTE
PC CONTROL
OUT
CONTROL
INPUT
AUDIO RGB INPUT 1
AUDIO RGB INPUT 2
S-VIDEO
L / MONO
R VIDEO
Turn on the projector.
Step3
IN
AC
For Mac, use the supplied
pin adapter to connect to the
computer 's video port.
Power button
NOTE: To turn off the projector, press and
hold the POWER button for a minimum
of two seconds.
MultiSync MT Series LCD Projectors
Step4
Set up the Projector
To adjust the projector' s focus or to zoom in and out, use
the Focus/Zoom ring on the lens.
Focus ring
IN
A C
Zoom ring
AC IN
If necessary, adjust the front foot to properly
position the projected image on the screen.
If the projected image does not appear
square to the screen then use keystone cor-
rection for proper adjustment.
Printed in Japan
78038451