Beko WCC 8604BW1 User Manual page 17

plug. After the container is emptied, repeat
the above procedure to drain the water in the
machine completely. When draining of water is
finished, close the end by the plug again and
fix the hose in its place. Turn the pump filter to
take it out.
Discharging the water when the product does
not have an emergency draining hose:
Place a large container in front of the filter to
catch water from the filter. Loosen pump filter
(anticlockwise) until water starts to flow. Fill
the flowing water into the container you have
placed in front of the filter. Always keep a piece
of cloth handy to absorb any spilled water.
When the water inside the machine is finished,
take out the filter completely by turning it.
Clean any residues inside the filter as well as
fibers, if any, around the pump impeller region.
Install the filter.
A
If your product has a water jet feature, be
sure to fit the filter into its housing in the
pump. Never force the filter while installing
it into its housing. Seat the filter into its
place completely. Otherwise, water may
leak from the filter cap.
If the filter cap is composed of two pieces,
close the filter cap by pressing on the tab. If it
is one piece, seat the tabs in the lower part into
their places first, and then press the upper part
to close.
17
EN