Vibe OPTISOUNDMERC4-V2 Manual page 5

OPTISOUNDMERC4C-V2 Wiring Connections
Connect midrange input
to "MID" connector from
the crossover.
Connect crossover input to
factory midrange connector.
The OPTISOUNDMERC4C-V2 has been designed for easy plug and play installation in
mind.
Firstly connect the factory midrange speaker connector to the "IN" connector on the
crossover. The midrange should be connected tothe "MID" output connector from the
crossover and the tweeter should be connected to the "TW" output connector from the
crossover.
After connections are made, you can tune the level of the tweeter to your desired
preference using the attenuation selection switch which has 0dB, -3dB and -6dB settings.
OPTISOUNDMERC4C-V2
Connect tweeter input
to "TW" connector from
the crossover.
5