Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual CONTENT 1. SAFETY INSTRUCTION 1.1 Personal Safety 1.2 Work Area Safety 1.3 Power Tool Use And Care 1.4 Battery Tool Use And Care 1.5 Hazards of Incorrect Operation 1.6 Straps Dispenser 1.7 Welding Effects 1.8 Correct Strap Cutting 1.9 Regular Maintenance...
Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual 1. SAFETY INSTRUCTION 1.2 Work Area Safety Keep work area clean and well lit. Cluttered or dark areas invite accidents. Read all safety warnings and all instructions. Do not operate power tools in explosive atmospheres, such as in the Failure to follow the warnings and instructions may result in electric presence of flammable liquids, gases or dust.
Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual 1.8 Correct Strap Cutting Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. Please cut off the strap with a suitable cutting tool and ensure a safe distance When battery pack is not in use, keep it away from other metal objects, like between the strap and the operator.
Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual 2. TECHNICAL PARAMETERS 3. ATTACHMENT 2.1 Machine Introduction Please use the accessories/parts and maintenance tools required in this operation manual. It may cause hurt if you using the unfit accessories/parts/maintenance tools. LGT260 series electric battery powered strapping tool has been improved greatly in functions, performance and appearance after continuous tests and improvements by our 3.1 Battery Specification...
Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual 3.4 Suspension System(optional) Figure 1: Selection 1 of suspension position during operation Q-2062 Figure 2: Selection 2 of suspension position during operation T023...
Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual 4. MACHINE APPEARANCE AND OPERATING PANEL 5. OPERATION STEPS 5.1 Installation Please don't expose the tool in the rain or wet environment! Button 1: Button 2: For the sake of safety, the battery is not charged full when delivered.
Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual Mode selection(MODE) and working status indicator: Battery Charging: Operation mode selector (MODE): Insert the battery to be charged There are three operation modes: Manual(MAN), Semi- Yellow Blue into the charger slot and plug it...
Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual 5.2.2 Basic Settings Soft Mode (L- -): Tension range: 400N-1600N Level: 1-9 Manual mode (MAN): Tensioning function and welding function will be operated separately. Note: This mode is used when objects to be strapped are required to be strapped Press and hold the button Tensioning “1”...
Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual 5.2.3 Strapping Operation Steps d.Weld and cut off the strap: Weld and cut off the strap to a. wrap the PP/PET straps around finish the strapping operation the object to be packed: by referring to the Method for...
Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual 5.2.5 Operation Essentials For Three Modes 5.3 Strapping Effect and Adjustment 5.3.1 Strap Welding Effect Judgment Manual Semi-Automatic Full-Automatic Item Mode(MAN) Mode(SEM) Mode(AUT) It is necessary to control the welding effects after each strapping, which can be a.
Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual 5.3.3 Reference for Tension Force from Tension Wheel ( Unit: N) 6.WIRING DIAGRAM Normal mode (H) Flexible mode (L) Gear 1400 Negative Pole of 1900 Battery...
Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual 7. COMMON FAULT INDICATION AND TROUBLESHOOTING 8. REPLANCEMENT OF WEARING PARTS 7.1 Machine Fault Code Description Note: please remove the battery before repairing the machine each time. E0.2 Tension motor timeout fault (tension function not completed after more than 10 seconds) Description of...
Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual Continued 9. SPARE PARTS LIST Description Part Code 2010100168 Q-2041 Base rocker Table 1 2011000235 Q-2042 Fusion drive pin Description Part Code Q-0004 Base rocker pin 1021605521...
Page 15
Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual Battery-operated Hand Tool LGT260 for Plastic Strapping User Manual Continued Continued Description Description Part Code Part Code 1030127949 Q-6006 Left hood 1030131015 Q-T219B Screw M4×20 1030129667 Q-6007 Support frame 1021510270 Q-T223B Timing belt MXL-65 teeth-12mm 1030130958 Q-6008A...
Need help?
Do you have a question about the LIGOTECH LGT 260 and is the answer not in the manual?
Questions and answers