Page 2
Thank you for your purchase! Laser Corporation is 100% Australian owned & operated. To get the most out of your product please read the user manual carefully and keep for future use. For specific information relating to your product such as Spare Parts, FAQs, Warranty claims, and...
SPECIFICATIONS 0°C – 50°C or Temperature Range: 32°F – 122°F Time Format: 12 & 24HR Screen Size: 52 x 52mm 1.5V, 3 x AAA Battery: (not included) 4.5V Working Voltage: Standby Time: 90 – 150 days Dimensions: 78 x 78 x 78mm Weight:...
Page 5
CONTROLS Light Alarm Down Press to turn LED light on. 1. Light Tapping the top of the clock can also turn on the LED light. The light will illuminate for a few seconds before turning off.
Page 6
CONTROLS Continued... Press to increase value. 2. Up In Time view tap to switch between 12 & 24HR time. In Alarm view tap to turn alarm and snooze on. Press to decrease value. 3. Down In Time view tap to switch between Celsius and Fahrenheit temperature.
Page 7
CONTROLS Continued... Press to increase value. 5. Alarm In Time view tap to switch between 12 & 24HR time. In Alarm view tap to turn alarm and snooze on.
OPERATING INSTRUCTIONS Setting Time & Date • Insert 3 x AAA batteries. • Ensure the unit is powered on and in normal display mode. • Press “Set” to activate setting of time and date. • Adjust the values by pressing the “Up”...
OPERATING INSTRUCTIONS Continued... Setting the Alarm • Ensure the unit is powered on and in normal display mode. • Make sure you have set the correct time. • Press the “Alarm” button to switch to alarm mode. • Press “Set” to activate setting of the alarm.
Page 10
OPERATING INSTRUCTIONS Continued... • Once finished press the “Alarm” button to exit or don’t press anything for approx. 1 minute. • To activate the alarm, press the “UP” or “DOWN” button till you see a small “Bell” icon onscreen. • To activate snooze, press the “UP” or “DOWN”...
Page 11
OPERATING INSTRUCTIONS Continued... Note: • The snooze duration is between 1 – 60 minutes. Careful when setting the Snooze value to 60 minutes as this will not sound the snooze alarm again for 1 hour. • The snooze alarm will keep sounding after the elapsed time unless the “Zz”...
TROUBLESHOOTING: No Power: • Check batteries and replace as required. The Alarm keeps sounding: • If you have a snooze alarm set as indicated by the “Zz” icon onscreen, then the alarm will activate every interval the snooze duration has been set e.g., if your snooze duration is set as 15, then the alarm will sound every 15 minutes after the initial alarm until...
Page 13
Visit our website www.laserco.com.au Check us out at www.youtube.com/lasercoau...