Table of Contents
Advertisement
Loading and Playing a DVD
Loading and Playing a DVD
Before you load a disc, make sure that it is compatible with the
player. Note that the following discs CANNOT be used with this
player:
•
Laserdisc
•
CD-I, CD-ROM, CD-R, DVD-ROM
•
Mini Disc
•
Discs recorded using other broadcast standards
(i.e. PAL or SECAM)
•
CD-G discs play audio only, not graphics
To Load and Play a DVD
Make sure that you have properly connected the DVD player
(see "Connections") and the player is turned on before you
begin.
1. Press the OPEN•CLOSE button on the front of the
DVD player.
2. Place a disc gently into the tray with the disc's label
facing up.
3. Press the PLAY button to close the disc tray.
The DVD player reads the table of contents, and displays
the disc's title menu (if it has one).
Legends of Indiana Baseball
Title Menu
1. High School
2. College
3. Semi-Pro
4. Professional
An example of a disc's title menu.
4. Use the MOVE arrow buttons to point to (highlight) a
menu item, and then press SELECT to begin playing the
highlighted menu item.
5. Press STOP to stop playback.
20 Playing DVDs
A List of Titles
Insert disc with the label side facing up.
Resume Feature
When you stop disc play, the player
remembers where you stopped, so when
you press PLAY again to begin play, it
will pick up where you left off (unless
the disc is removed, or the player is
unplugged). Because resume uses
elapsed time as a marker, this feature
does not work with discs that do not
keep elapsed time (for example,
interactive DVDs).
Advertisement
Table of Contents
