Fujitsu LIFEBOOK T937 User Manual page 8

Hide thumbs Also See for LIFEBOOK T937:
Table of Contents

Advertisement

AUSTRALIAN REGULATIONS
Important Health and Safety Information
This STYLISTIC Tablet PC complies withh the
relevant safety regulations for data processing
equipment. If you have questions about using your
Tablet PC in a particular area, please contact your
sales outlet or our Hotline/Hlep Desk.
Additional safety notes for devices with
modem
WARNING
FOR SAFETY REASONS, ONLY CONNECT
EQUIPMENT WITH A TELECOMMUNICATIONS
COMPLIANCE LABEL. THIS INCLUDES
CUSTOMER EQUIPMENT PREVIOUSLY
LABELLED PERMITTED OR CERTIFIED.
Connection of Non Certified/ Approved
peripherals may result in the equipment
operating outisde the Australian EMI
Standards.
M o d e m s c o n n e c t e d t o t h e A u s t r a l i a n
telecommunications network must be operated
in accordance with the Labelling Notice. This
modem has benn specifically configured to
ensure compliance with the ACMA standards.
Do not adjust your modem or software outside
the values indicated below. To do so would
result in your modem being operated in a non-
compliant manner.
The unit shall be connected to Telecommunications
Network through a line cord, which meets the
requirements of ACMA AS/ ACIF S008:2006.
The equipment shall be powered through an
Australian Approved mains cord set. When the
Secondary Landscape Orientation of the Tablet
PC is held close to the body, the antenna must
be in closed condition to avoid physical damage
to the Antenna.
Copyright
Call Attempts / Retries:
Applications software shall be configured so
that no more than 3 attempts are made to
establish a connection to a given number(Note:
if the modern can detect serice tones, up to 10
attempts can be made). If the call sequence is
unsuccessful, there shall be a delay of at least
30 minutes before attempting to call the number
again.
Failure to set the modem and any application
s o f t w a r e u s e d w i t h t h e m o d e m , t o t h e
values shown above will result in the modem
being operated in a non-compliant manner.
Consequently, this would be in violation of the
Labelling Notice for 1997 prescribes penalties
for the connection of non-complaint equipment.
vii

Advertisement

Table of Contents
loading

Table of Contents