To change an action in the middle of a massage
2
Select again in steps
●
Press
within approximately 40 seconds of reselecting an action in step
automatically.
If you want to massage with tapping action only
❶
Press
to turn on the power.
❷
Press
.
❸
Start the tapping action by pressing
ㅡ Tapping action will be performed at the current massage head positions without performing body scanning.
ㅡ To change the action, select with steps
4
Press
●
The massage heads will move to selected position to start the massage
after the body scanning is completed. (See page EN22 about body
scanning)
Press
The tapping can be turned OFF/ON by pressing this button.
OFF/ON cannot be selected when massaging with the tapping
action.
5
The massage will automatically end
approx. after 16 minutes.
4
–
.
.
2
–
4
.
to start the action.
to add tapping.
2
, otherwise the reselection will be canceled
EN25