Caution On Diassembly - Sharp CD-MPS1000 Service Manual

CD-MPS1000
E Market CD-MPS1000 Service Manual CD-MPS1000 Audio
CHAPTER 3.
MECHANISM BLOCKS

[1] Caution on diassembly

Caution on Disassembly
Follow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need to be removed when disassembling the unit. After servicing the unit, be sure to rearrange
the leads where they were before disassembling.
CD-MPS1000
STEP REMOVAL
1 Top/Side Cabinet 1. Screw .................... (A1) x11
2 Changer Unit/
Rear Panel B
3 Rear Panel A with 1. Screw ...................... (C1) x6
Fan motor
4 Main PWB
5 Front Panel
6 Tape Mechanism 1. Open the Cassette Cover.
7 Display PWB
8 Game Input PWB 1. Screw...................... (H1) x2
9 CD Servo PWB
10 Changer
Mechanism Unit
11 CD Mechanism
Note:
After removing the connector for the optical pickup from the
connector, wrap the conductive aluminium foil around the front end
of the connector so as to protect the optical pickup from electro-
static damage.
Top/Side Cabinet
(A1)x3
φ3x10mm
Rear Panel B
Rear Panel A
(A1)x5
φ3x10mm
PROCEDURE
1. Screw ...................... (B1) x2
2. Hook ........................ (B2) x2
3. Flat Cable................ (B3) x1
4. Socket ..................... (B4) x1
2. Socket ..................... (C2) x1
1. Screw ...................... (D1) x2
2. Flat Cable ............... (D2) x1
3. Socket ..................... (D3) x4
4. Flat Wire .................. (D4) x1
5. Screw ...................... (D5) x4
1. Screw ...................... (E1) x2
2. Flat Wire .................. (E2) x1
3. Hook ........................ (E3) x2
2. Screw ....................... (F1) x6
3. Flat Cable ................ (F2) x1
1. Knob ........................ (G1) x1
2. Screw .................... (G2) x10
........................
3. Hook (G3) x5
1. Screw ....................... (J1) x2
2. Flat Cable ................ (J2) x2
3. Socket ...................... (J3) x1
4. Hook ......................... (J4) x1
1. Screw ...................... (K1) x4
2. Changer Chassis .... (K2) x1
1. Screw ....................... (L1) x4
Front Panel
(A1)x3
φ3x10mm
(B2)x1
(C2)x1
Main PWB Pull
Changer
Mechanism
Unit
Rear
Panel B
(B1)x2
φ 3x10mm
Rear
Panel A
(C1)x6
φ 3x10mm
Fan Motor
(D2)x1
(D3)x1
(E3)x1
(D5)x4
φ 3x6mm
Power PWB
(D4)x1
(D3)x1
(E1)x2
φ 3x8mm
3 – 1
CD Servo
(B3)x1
PWB
(B4)x1
Front Panel
(B2)x1
Pull
Lug Wire
Main PWB
(D1)x2
φ
3x10mm
(D3)x2
(E2)x1
Front Panel
(E3)x1
Main PWB