Caution On Disassembly; Chapter 3. Mechanism Blocks 1] Caution On Disassembly - Sharp CD-ES700 Service Manual

CD-ES700/CD-ES77
CHAPTER 3. E Market CD-ES700/CD-ES77 Service Manual CD-ES700/CD-ES77 CD-ES700/CD-ES77
MECHANISM BLOCKS

[1] Caution on disassembly

Caution on Disassembly
Follow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need to be removed when disassembling the unit. After servicing the unit, be sure to rearrange
the leads where they were before disassembling.
CD-ES700/CD-ES77
STEP REMOVAL
1 Top/Side Cabinet 1. Screw .................... (A1) x11
2 Changer Unit/
Rear Panel B
3 Rear Panel A with 1. Screw ...................... (C1) x6
Fan motor
4 Main PWB
5 Front Panel
6 Tape Mechanism 1. Screw ....................... (F1) x6
7 Display PWB
8 Game Input PWB 1. Screw...................... (H1) x2
9 CD Servo PWB
10 Changer
Mechanism Unit
11 CD Mechanism
Note:
After removing the connector for the optical pickup from the
connector, wrap the conductive aluminium foil around the front end
of the connector so as to protect the optical pickup from electro-
static damage.
Top/Side Cabinet
(A1)x3
φ3x10mm
Rear Panel B
Rear Panel A
(A1)x5
φ3x10mm
PROCEDURE
1. Screw ...................... (B1) x2
2. Hook ........................ (B2) x2
3. Flat Cable................ (B3) x1
4. Socket ..................... (B4) x1
2. Socket ..................... (C2) x1
1. Screw ...................... (D1) x2
2. Flat Cable ............... (D2) x1
3. Socket ..................... (D3) x4
4. Flat Wire .................. (D4) x1
5. Screw ...................... (D5) x2
1. Screw ...................... (E1) x2
2. Flat Wire .................. (E2) x1
3. Hook ........................ (E3) x2
2. Flat Cable ................ (F2) x1
1. Knob ........................ (G1) x1
2. Screw .................... (G2) x10
1. Screw ....................... (J1) x2
2. Flat Cable ................ (J2) x2
3. Socket ...................... (J3) x1
4. Hook ......................... (J4) x1
1. Screw ...................... (K1) x4
2. Changer Chassis .... (K2) x1
1. Screw ....................... (L1) x4
Front Panel
(A1)x3
φ3x10mm
(B2)x1
(C2)x1
Pull
Main PWB
Changer
Mechanism
Unit
Rear
Panel B
(B1)x2
φ3x10mm
Rear
Panel A
(C1)x6
φ3x10mm
Fan Motor
(D2)x1
(D3)x1
(E3)x1
(D5)x2
φ3x10mm
Power PWB
(D4)x1
(D3)x1
(E1)x2
φ3x8mm
3 – 1
CD Servo
(B3)x1
PWB
(B4)x1
Front Panel
(B2)x1
Pull
(D1)x1
φ3x10mm
Lug Wire
Main PWB
(D1)x1
φ3x18mm
(D3)x2
(E2)x1
Front Panel
(E3)x1
Main
PWB