Plantronics BackBeat FIT 500 Series - Wireless Headphones Manual

Pair

Get Paired

The first time you power on your headphones, the pairing process begins.

1. Slide the power switch on. You hear "pairing" and the LEDs flash red and blue.
   
2. Activate Bluetooth^® on your phone and set it to search for new devices.

• iPhone Settings > Bluetooth > On*
• Android Settings > Bluetooth: On > Scan for devices*

NOTE *Menus may vary by device.

3. Select "PLT BBFIT500 Series."

If necessary, enter four zeros (0000) for the passcode or accept the connection.

Once successfully paired, you hear "pairing successful" and the LEDs stop flashing.

Pair second device

1. Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and blue.
   
2. Select "PLT BBFIT500 Series" in your device's Bluetooth Settings.

Pair to Mac

If your Mac is Bluetooth enabled, you can pair your headset to it.

1. Place your headset in pair mode (slide and hold the power button towards the Bluetooth icon). You will hear "pairing" and the LEDs will flash red and blue.
2. On your Mac, choose Apple menu > System Preferences > Bluetooth.
3. Click Set Up New Device or "+", select "PLT BBFIT500 series stereo" and follow the onscreen instructions.

Charge and fit

Charge

It takes up to 2.5 hours to fully charge your headphones. The LEDs turn off once charging is complete.

TIP To check the headphones battery status, tap the Call button while wearing your headphones. Headphones must be in idle state.

Your headphones have up to 18 hours of listening time.

The basics

Mute/unmute

Volume up

Volume down

Play/pause music

Track forward

Track backward

Bluetooth pair button

Power on/off

Call button

Be safe Please read the safety guide for important safety, charging, battery and regulatory information before using your new headset.

Power on/off
Slide the switch to power on or off.

Play/pause music
Tap the Play/pause button.

Track selection
Tap the Forwardbutton or Back button to control the track selection.

Activate voice assistant
If your smartphone has a voice-enabled assistant, press and hold the Call button for 2 seconds and wait for the phone prompt.

Make/Take/End Calls
Answer or end a call
Tap the Call button.

Decline a call
Press and hold the Call button for 2 seconds.

Call back last call (smartphone)
To dial your last number you dialed, double-tap the Call button.

Mute
During a call, press the volume up and down buttons. You hear "mute on/off."

Find your headset
Most headsets are found under car seats, in pockets or on a messy desk. For less obvious locations, locate your headset by sending a tone to find it.

1. Download the Plantronics Hub app for iOS and Android by visiting plantronics.com/software.
2. Locate your lost headset by using Find MyHeadset within the Plantronics Hub app.

Support

For warranty details, go to plantronics.com/warranty.

NEED MORE HELP?
plantronics.com/support

Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States

Plantronics B.V.
Scorpius 171
2132 LR Hoofddorp
Netherlands

^© 2017 Plantronics, Inc. BackBeat and Plantronics are trademarks of Plantronics, Inc. registered in the US and other countries, and Plantronics Hub is a trademark of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners.

Patents pending.

211262-06 (09.17)