Quatech DSEW-100D Quick Start Manual
High performance serial device servers
Hide thumbs
Also See for DSEW-100D:
- User manual (98 pages) ,
- Specifications (2 pages) ,
- User manual (98 pages)
Advertisement
Quatech SDS Quick Start Guide
Step
Procedure
Step 7
Follow the prompts of the Install
Wizard to quickly install the device
drivers for your new SDS.
Step 8
Repeat steps 4-7 on any other
computers that will use the COM
ports on your new SDS.
Step 9
You can now use the SDS serial
ports just like you would use a built-
in serial port.
Configuring the SDS using a Web interface
If you wish to make changes to the configuration at a future time, simply
enter the IP address of the Serial Device Server into the address bar of your
computer's Web browser.
DOC-SDS-QSG
June 2006
100-2000-162
Description
The install process is explained in
detail in the SDS User's Manual,
which you can find on the SDS
installation CD-ROM, or at Quatech's
website: http://www.quatech.com.
Each serial port on the SDS is
independently addressable over the
network.
See the SDS User's Manual for
details on many other modes of
operation.
Page 8
High Performance
Serial Device Servers
Quick Start Guide
Advertisement
Table of Contents
Related Manuals for Quatech DSEW-100D
Summary of Contents for Quatech DSEW-100D
-
Page 1: Quick Start Guide
Quatech SDS Quick Start Guide Step Procedure Description Step 7 Follow the prompts of the Install The install process is explained in Wizard to quickly install the device detail in the SDS User’s Manual, drivers for your new SDS. which you can find on the SDS installation CD-ROM, or at Quatech’s... - Page 2 Quatech, Inc. Quatech, Inc. reserves the right to change this documentation or the product to which it refers at any time and without notice.
-
Page 3: Getting Started
Use this Quick Start Guide to quickly get your new SDS up and running. More in-depth information is provided in the User’s Manual, which is available as a PDF file on both the installation CD-ROM and at Quatech’s Web site: http://www.quatech.com. -
Page 4: Identifying Parts
Step 2 - Connect an Ethernet cable between your source Ethernet outlet and the 10/100 port on the SDS. Quatech’s wireless Device Servers need to have a wireless network connection established before they can be configured for use. To enable the wireless connection, follow the steps below.
Need help?
Do you have a question about the DSEW-100D and is the answer not in the manual?
Questions and answers