Sloan OPTIMA 195 Installation Instructions Manual

INSTALLATION INSTRUCTIONS FOR OPTIMA
CONCEALED WITH TRUE MECHANICAL OVERRIDE FLUSHOMETERS
MODEL 152
Unless otherwise noted, Sloan Valve Company warrants this product, manufactured and sold for commercial or industrial uses, to be free from defects in material and workmanship for a period of three (3)
years (one (1) year for special finishes, SF faucets, PWT electronics and 30 days for PWT software) from date of first purchase. During this period, Sloan Valve Company will, at its option, repair, replace, or
refund the purchase price of any product which fails to conform with this warranty under normal use and service. This shall be the sole and exclusive remedy under this warranty. Products must be returned
to Sloan Valve Company, at customer's cost. No claims will be allowed for labor, transportation or other costs. This warranty extends only to persons or organizations who purchase Sloan Valve Company's
products directly from Sloan Valve Company for purpose of resale. This warranty does not cover the life of the batteries.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE COMPANY RESPONSIBLE FOR ANY
CONSEQUENTIAL DAMAGES OF ANY MEASURE WHATSOEVER.
ROUGH-IN
MODEL 152
‡ When installing in a handicap stall:
Position of the sensor box can be raised or lowered 1" (25 mm) if in conflict with
handicap grab bars. Per the ADA guidelines (section 604.9.4), it is required that
grab bars be split or shifted to the wide side of stall.
SYSTEM SENSOR ACTIVATED
®
MODEL 195

LIMITED WARRANTY

MODEL 195
L DIM. 2¾"
+
(70 mm)
WALL
THICKNESS
‡
19"
(482 mm)
Concealed Closet Flushometers
1-1/2" Rear Spud
• Model 152 ES-S TMO SBX
Concealed Urinal Flushometers
3/4" Rear Spud
• Model 195 ES-S TMO SBX
4¾"
2¾"
(121 mm)
(70 mm)
SENSOR LOCATION & POSITIONING IS
CRITICAL!
Failure to properly position the electrical boxes
to the plumbing rough-in will result in improper
installation and impair product performance.
All tradesmen (plumbers, electricians, tile
setters, etc.) involved with the installation of
this product must coordinate their work to
assure proper product installation.
Code No. 0816877
Rev. 2 (02/20)
¾"
(DN 20 mm)
IPS
SUPPLY
1½"
(38 mm)
13½"
3½"
(343 mm)
(89 mm)