EN: ELECTRIC DRYER FOR TOWEL AND CLOTHES 2 IN 1 | Instruction Manual
SPECIFICATION
Model
Power
Voltage
Frequency
IP protection class
Freestanding unit dimensions
Wall-mounted unit dimensions
OPERATINGINSTRUCTIONS
POWER ON/OFF SWITCH
1. Press the switch at (l) position, the power indicator light up and this heater start to work.
2. Press the switch at [o] position, the power indicator light off and this heater finish working.
OPERATION
1. Please read the installation instruction carefully to understand how to install your towel warmer.
2. Make sure the installation is completed.
3. Press the power switch to [OFF] position. (i.e. Power indicator light is off).
4. Plug the power cord into an electrical outlet.
5. After connecting to suitable power supply, press the power ON/OFF switch, the power indicator lights up and then the
warmer starts the heating work.
MAINTENANCE
lf the power cord is damaged, it must be replaced by the professionals from the maintenance department or similar
department from manufacturer to avoid the danger.
CLEANING
1. Before cleaning, please unplug the product and let it cool down.
2. Do not put the product,power cord and plug into the water. Keep the cord dry.
3. Never clean the product with alcohol or solvent-based cleansers.
4. Please clean the surface by wet towel first and then dry it with a soft cotton cloth.Please NOTE: Do not use a metal ball or a
rough cloth to wipe the towel rack, it will scratch the surface of the product.
5. Please do not us alcohol or solvents on plastic components, it will cause the cracking and ageing of these parts.
HCD-1000
100 W
220-240 V~
50/60 Hz
IP20
560 * 300 * 920 mm
560 * 100 * 800 mm
5