Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Security Menu
The Security menu provides restricted access to special set-up and
security features of the camera. Access to this menu requires the
owner's unique camera card or the PIN code that has been set for the
camera.
Note:
An owner's card is linked to the serial number of the camera and is
unique to that camera. It cannot be used as an owner's card for another
camera.
Inserting the owner card into the camera gives direct access to the
security menu. If you select the Security menu without this card
inserted, you must enter the correct PIN code to gain access to the
Security menu.
User Levels
The installed user level function in the Security menu restricts access,
in varying degrees, to the operational controls of the camera. There are
four user levels: user0, user1, user2 and user3.
The purpose of the user levels is to restrict the set of functions which
can be changed by whoever is using the camera. In this way a more
centralized and uniform control can be achieved and the danger of the
camera operator accidentally changing critical functions while shooting
is reduced.
User level 0 is a special protection level which locks most of the
operational controls of the camera. Use this level to ensure that a
camera that has been set-up is not tampered with. User level 0 is not
normally used for operational purposes. The appendix indicates which
functions are available at each user level.
PIN Code
The PIN code of the camera can be viewed and changed in the Security
menu. The camera's PIN code when it leaves the factory is set to 0000.
It is strongly advised that this code be changed by the owner on receipt
of the camera. This ensures added protection against unauthorised
access to the Security menu.
Using the Menu System
FilmStream mode
6-7
Advertisement
Table of Contents
