THOMSON grass valley VIPER LDK 5490 User Manual page 25

All manuals and user guides at all-guides.com
Attach the camera to the tripod adapter plate as follows:
a. Slide the camera horizontally along the tripod adapter plate from
back to front ensuring that the front of the camera engages the V-
slot (1) at the front of the tripod adapter plate, and that the slot on
the bottom of the camera engages the stud (2) at the rear of the
tripod adapter plate.
b. Firmly push the camera forward until it clicks into place.
c. When the camera is mounted on the tripod tighten thE locking
lever (5) to ensure that the stud (2) at the rear of the plate is locked
firmly in place.
Failure to attach the camera to the tripod adapter plate in
the correct manner could result in an unsecured camera.
Ensure that the rear stud (2) is engaged and that the camera
To remove the camera from the tripod proceed as follows:
a. When removing the camera first open the locking lever (5) to free
the rear stud (2).
b Press the red locking lever (3) against release handle (4) on the
tripod adapter plate and hold.
c. Ensure that you have a firm hold of the camera.
d. Pull the release handle (4) forward.
e. Move the camera backwards and up. The camera is now free from
the tripod adapter plate.
Assembling the Units
Caution
clicks into place.
FilmStream mode 2-9