Table of Contents
Advertisement
CONTROLS AND FEATURES
To display the device information:
a
Press QUICK to open the Quick Menu in list mode or
Multi View mode.
b
B
b
Press
or
to select Device Information.
Setting DLNA CERTIFIED™ Server waking up:
You only need to complete the Media Server Setup if
you wish to use the "Wake-on-LAN" feature.
a
C c
Press MENU /
/
Player / Media Player Setup icons and press OK.
b
B
b
Press
or
to select Media Server Setup and press
OK. A list of currently available DMSs will appear.
c
B
b
Press
or
to select the desired device, and press
OK. A check will appear in the box. To remove the
check, press OK again.
d
c
Press
to highlight Done, and then press OK to save.
NOTE:
• Up to 8 DMSs can be selected.
• Even if the device checked is powered off, it will be
displayed but grayed out in the Select Device window.
When OK is pressed on a highlighted grayed out item, a
confirmation of Wake-on-LAN is displayed. The TV tries to
wake up the DMS if Yes is pressed. The Server will start if it
supports Wake-on-LAN feature.
• When some DMSs are connected, it may take time until the
list is displayed. The list may be refreshed by the following
operation.
- The device selection window is closed once and it is
displayed again.
- The RED button is pressed.
USB 2 Port Setup (if available)
a
C c
Press MENU /
to highlight Setup icon.
b
B
C c
Press
/
to highlight System Setup icon and
press OK.
c
B
b
Press
or
to select USB 2 Port Setup and press
c
or
to select Recorder or Media Player.
B
C c
/
to highlight Media
Viewing photo files (on a DLNA
CERTIFIED™ Server or USB device)
There are three types of viewing modes.
Multi View
This view allows you to search for photos in a grid format.
The pictures are displayed using thumbnail data in each
image file.
PHOTO
/Folder
1/54
XXXXXXXXXXX.jpg
OK
The initial highlighted position will be on the top left
thumbnail in the Multi View.
a
B b C c
Press
If all of the photos will not fit in one screen, when
C
pressing
at the top left thumbnail, the screen will
move to the previous page. Conversely, when
c
pressing
at the bottom right thumbnail, the screen
will move to the next page.
U
u
P
P
buttons can be used to page up/down the
photo list when there are more photos than will fit
onto one screen. When the P
pressed, the highlight shall be on the photo at the top
left of Previous/Next list.
b
When you select a folder, press OK to move to the
next layer. Press BACK to move back to the previous
layer.
c
Press OK to view the selected photo in Single View
mode.
C
NOTE: When the TV is used as a DMR, this feature is not
available.
Single View
In this mode, only files located in the selected directory will be
displayed. This view allows you to change the photo content
manually. When moving from Multi View to Single View, the
currently selected photo will be displayed.
70
Photo list example
10:00 Fri, 21 Feb 2010
Select
QUICK Features
P
Page
to move the highlight in one window.
U
u
P
buttons are
Sort: Title
1920x1080
Advertisement
Table of Contents
