Philips 50PUT8115 User Manual page 38

What You Need
You can pause a digital TV broadcast and resume
watching it a bit later.
To pause a TV programme you need...
• a connected USB Hard Drive formatted on this TV
• digital TV channels installed on this TV
• to receive channel information for the on screen TV
Guide
With the USB Hard Drive connected and formatted,
the TV continuously stores the TV broadcast you are
watching. When you switch to another channel, the
broadcast of the former channel is cleared. Also
when you switch the TV to standby the broadcast is
cleared.
You cannot use Pause TV when you are recording.
Pause a Programme
To pause and resume a broadcast...
• To pause a broadcast, press Pause. A progress bar
at the bottom of the screen appears briefly.
• To call up the progress bar, press Pause again.
• To resume watching, press Play.
With the progress bar on screen, press Rewind or
press Forward to select from where you want to
start viewing the paused broadcast. Press these keys
repeatedly to change speed.
You can pause a broadcast for a maximum time span
of 90 minutes.
To switch back to the live TV broadcast, press Stop.
Replay
Since the TV stores the broadcast you are watching,
you can mostly replay the broadcast for a few
seconds.
To replay a current broadcast...
1 - Press Pause
2 - Press Rewind. You can press it repeatedly to
select from where you want to start viewing the
paused broadcast. Press these keys repeatedly to
change speed. At one point you will reach the start of
the broadcast storage or the maximum time span.
3 - Press Play to watch the broadcast again.
4 - Press Stop to watch the broadcast live.
38