Sound Settings - Philips 50PUT8115 User Manual

Movie expand 16:9
Scale 4:3 format to 16:9. Not recommended for HD or
PC.
Wide screen
Stretches the picture to a 16:9 format.
Other Picture Settings
MENU > TV options > Settings > Device
preference > Picture and press OK.
Backlight
Adjust the video backlight intensity.
Brightness
Set the level of brightness of the picture signal.
Note: Setting of brightness much away from
reference value (50) may result lower contrast.
Contrast
Adjust the contrast value of the picture.
Saturation
Adjust the colour saturation value of the picture.
HUE
Adjust the hue value of the picture.
Sharpness
Adjust the level of sharpness in fine detail of the
picture.
Gamma
Set a non-linear setting for picture luminance and
contrast. This is a setting intended for expert users.
Color Temperature
Set the picture to a preset color temperature or adjust
the setting yourself.
Advanced video
set the advance settings.
• DNR
• MPEG NR
• Adaptive Luma Control
• Local Contrast Control
• DI Film Mode
• Blue Stretch
• Game Mode
• PC Mode
• HDMI RGB Range
Color Tuner
Fine tune the color setting yourself.
11 Point White Balance Correction
Customise the whitepoint balance based on the
selected colour temperature of the picture.
Reset to Default
Reset the current picture settings to default.
11.3

Sound Settings

MENU > TV options > Settings > Device
preference > Sound and press OK.
Speakers
Set the TV to play the sound on TV or on the
connected audio system
You can select where you want to hear the TV sound
and how you want to control it.
• If you select External audio system, you
permanently switch off the TV speakers.
• If you select TV speakers, the TV speakers are
always on. All the sound related settings are
applicable to this mode.
Alternatively, you can change the setting
from MENU > TV options > Speakers.
Speaker Delay
Adjust the audio sync delay to synchronise the audio
to the video.
Digital Output
Digital output settings are available for optical and
HDMI ARC sound signals.
Set the audio out signal of the TV to fit the sound
capabilities of the connected Home Theatre System.
SPDIF Delay
For some Home Theatre Systems you might need to
adjust the audio sync delay to synchronise the audio
to the video. Select 0 if a sound delay is set on your
Home Theatre System.
Advanced sound settings
set the advance settings.
• DTS DRC
• Dolby audio processing
Reset to Default
Reset the current sound settings to default.
29