Remote for dimmable sensors with memory function (2 pages)
Summary of Contents for HAISEN HD06VCRH 3 (HN074)
Page 1
12VDC PLUG & PLAY 12VDC HIGHBAY MICROWAVE SENSOR HD06VCRH 3(HN074) In Accordance With Microwave Sensor for max 15M Height Plug & Play Design Bi-level Dimmable, Daylight Priority Remote Control Detection Area Daylight Sensor On/Off Control Warranty Stand-by period Stand-by dimming level Hold Time 15M Highbay Remote Control...
Mechanical structure 20.00 Ø52.00 6.00 12.00 Ø36.00 Ø28.82 44.00 43.96 Wiring Diagram HD06VCRH 3(HN074) DIM GND 12V Detection Patterns Ceiling Mounted Wall Mounted Highest mounting height is 15m 0.5-1.0M/S This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.
Page 3
Daylight Priority Dusk/Dawn sensor: Dual-PD technology brings a fully automatic dusk/dawn sensor which can tell the difference between natural light and LED light, to ensure the light will be off when needed. With Daylight priority function, HD06VCRH 3 is able to differentiate artificial light brightness from natural light after installed inside the fixture, and automatically turn off light when ambient brightness exceeds preset...
Page 4
2.Automatically ON/OFF function Hold time The sensor turns OFF light With sufficient daylight, even With insufficient daylight, automatically after when motion detected, light the sensor turns light ON holdtime when there's remains OFF. when m otion gets detected. motion detected. 3.Daylight Disable When daylight threshold is preset as "disable", the...
1. Please read the instructions carefully before using this product and keep it well for all users to read at any time. 2. The sensor should be installed by qualified electrician and ensure power is off before the installation. 3. We reserve the right to modify any incorrect text, image and necessary technical param- eters.
Page 6
REMOTE FOR DIMMABLE SENSORS WITH MEMORY FUNCTION Remote Keys Function Performance 1. "ON/OFF" key only functions as a switch of the light. 2. If press this button to turn off the lamp before it's short-circuited, ON/OFF ON/OFF the lamp will remain off after power-on again. Model: HD03R Press “Auto Mode”...
Page 7
How to Use HD03R Sensor Programming: For singla sensor testing purpose 1. ON/OFF button to turn on the light 2. RESET button so start programming 3. Choose necessary functional buttons of all the zones: detection area, holdtime, standby dimming level, standby period and daylight threshold 4.