Advertisement
5.2 CAMERA SETUP MENU
a. At main menu, select
icon, and press MENU button.
<< CAMERA SETUP >>
LENS MODE
AE MODE
WB MODE
BLC MODE
PZM SET
NIGHTSHOT
CAMERA ID
RETURN
<Fig5-5. CAMERA SETUP menu>
5.5 LENS MODE
① ZOOM Speed Control
: Set zoom speed 1 to 10, 10 steps.
ZOOM SPEED
1 → 2 → ... → 10
② Start Zoom Ratio
: Set boundary value of WIDE zooming.
START ZOOM
x 1 ~ x 24 ( in optical zoom region )
③ End Zoom ratio
: Set boundary value of TELE zooming. It can be set up to x400
including electronic zoom. ( in case the digital zoom limit is 16
times ) Once Start Zoom and End Zoom ratio are set,
Camera moves to setting zoom times simultaneously as it is
enabled to move to the desired position.
END ZOOM
x 25 ~ x 400 ( in digital zoom region )
④ E-Zoom Control
: ON means up to x400, OFF means only optical zoom region.
E-ZOOM
OFF → ON.
<< LENS MODE >>
ZOOM SPEED
START ZOOM
END ZOOM
AF MODE
O. RESET
O. AF TIME
MIN. DIST
RETURN
<Fig5-6. LENS MODE setup >
⑤ Set Focus Mode
: Three modes are available
AUTO
:It is used to focus automatically at all times.
MANUAL
: It is used to focus manually by pushing NEAR(+) / FAR(-)key.
When MANUAL mode is selected, it will focus for about 5 seconds
after zoom in(TELE) / out(WIDE), and return to MANUAL mode
automatically.
This is useful to focus accurately after zooming.
(In MANUAL mode, when it is powered not to focusing, it will be
returned to the setting before power off.)
ONESHOT
: It is similar to MANUAL mode, but some differences do exist.
In case the focus mode is ONESHOT, it is focused whenever
ONESHOT (AUTO/MANUAL key) key is pushed. It will be returned
to MANUAL mode after seconds (Special Menu : O.S. AF TIME)
if best focus cannot be found. In this case, press ONESHOT(AUTO/
MANUAL key) key again to set to the best focus.
PUSHAUTO (option)
: While key is pressed, Focus mode will remain AUTO.
☞ caution
1. According to the Model , order is Auto -> Manual -> Oneshot, or
Auto > Manual -> Pushauto.
- 13 -
10
1
400
AUTO
OFF
5
50CM
Advertisement
