Table of Contents
Advertisement
USER GUIDE
Door Latch
The door latch assembly included with your unit can
be installed to prevent the door from opening when the
vehicle is in motion.
To install, perform the following:
1.
Remove the two outer most screws from the non-
hinge side.
2.
Place spacer (2) over mounting holes. Place latch (1)
on top of spacer (2).
Note: Spacer (2) only required if included with
unit.
3.
Re-install the screws, but do not tighten all the way.
4.
Verify door latch engagement and adjust as necessary.
5.
Tighten screws.
1
2
Door latch can be used to prop door open approximately
1/2" (13 mm) when unit is not in use.
Door Latch
17
Advertisement
Table of Contents
