Id Remote Control - Philips 55BDL8005X User Manual

3.3.2. ID Remote Control

Set remote control ID number when using several displays.
Press [ID] button. The red LED blinks twice.
1. Press [ID SET] button for more than 1 second to enter the
ID Mode. The red LED lights up.
Press the [ID SET] button again to exit from ID mode. The
red LED lights off.
Press the digit numbers [0] ~ [9] to select the display you
want to control.
For example: press [0] and [1] for display No.1, press [1] and [1]
for display No.11.
The numbers available are from [01] ~ [255].
2. Not pressing any button within 10 seconds will exit the ID
Mode.
3. If a wrong button is pressed, wait 1 second after the red
LED lights off and then lights up again, then press the
correct digits again.
4. Press [ENTER] button to confirm. The red LED blinks twice
and then lights off.
NOTE:
• Press [NORMAL] button. The green LED blinks twice,
indicating the display is in normal operation.
• It is necessary to set up the ID number for each display
before selecting its ID number.
• Use " " (pause) key on the remote control to freeze
the screen. Use " " (play) key on the remote control to
unfreeze the screen.
• The "freeze" feature only can be adopted on "real" video
sources like VGA, HDMI, DVI, DP.
• Any operation on the remote control or video mode
change will unfreeze the screen.
23
55BDL8005X/55BDL8007X