Related Manuals for Samsung MIM-H05UN
Summary of Contents for Samsung MIM-H05UN
- Page 1 Air conditioner User & installation manual Wi-Fi Kit 2.0 MIM-H05UN • Thank you for purchasing this Samsung Product. • Before operating this unit, please read this manual carefully and retain it for future reference.
-
Page 2: Table Of Contents
Setting up and connecting to a Wi-Fi access point using your smartphone ....... 19 Downloading the SmartThings app and registering your Samsung account ......20 Connecting the SmartThings app to your product. - Page 3 California Proposition 65 Warning (US) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov. This installation manual explains how to install a Wi-Fi Kit to an indoor unit of Samsung system air conditioners. Read the installation manual thoroughly before installing the Wi-Fi Kit.
- Page 4 Safety precautions CAUTION • • Do not install the product in a place where it will be exposed to oil or vapor etc. - If the product is used in a place where it is exposed to oil, vapor or sulphur dioxide, parts of the product may get damaged or product may function abnormally.
-
Page 5: Accessories
Checks before Installation Accessories Wi-Fi Kit User & installation manual • CAUTION • Before installation, be sure to cut off power. • Follow applicable rules for electrical wiring. Make sure that the cables of the Wi-Fi Kit are installed inside a wall or covered to avoid being touched by the occupant. External Dimensions [Unit : mm (inch)] 185 (7.28) -
Page 6: Wi-Fi Kit Installation
Installing the Wi-Fi Kit Wi-Fi Kit installation • To ensure smooth operation, there should be no obstacle between the Wi-Fi Kit and wireless router that may interfere with communication. When the Wi-Fi Kit is too far from a router or there are CAUTION potentially interfering elements between them, it may cause problems with the performance of the Wi-Fi Kit that cannot be resolved by customer services. - Page 7 communication cables (F1, F2) to the terminals on the back of the front cover while adjusting to a suitable length. • You can connect up to 16 indoor units to a Wi-Fi Kit. NOTE [Unit : mm (inch)] Indoor unit 10 (0.4) and over 10 (0.4) and over Wi-Fi Kit...
- Page 8 Installing the Wi-Fi Kit Wi-Fi Kit wiring diagram 1) Connecting to a single outdoor unit (F1-F2) R1 R2 <Connection between the Wi-Fi Kit and multiple units> <Connection between the Wi-Fi Kit and a single unit> R1 R2...
- Page 9 2) Connecting to multiple outdoor units (R1-R2) R1 R2 R1 R2 F1 F2 F1 F2 Touch centralized controller - Connect R1 and R2 on the outdoor unit to F1 and F2 of the Wi-Fi Kit. - Other controllers (e.g. touch centralized controller, DMS) can be installed together. •...
- Page 10 Installing the Wi-Fi Kit R1 R2 R1 R2 F1 F2 Touch centralized controller - Connect R1 and R2 on the outdoor unit to F1 and F2 of the Wi-Fi Kit. - Other controllers (e.g. touch centralized controller, DMS) can be installed together.
- Page 11 Connect the BLK line (black) Connect the ORG line R1 R2 • When installing the Wi-Fi Kit, use proper electrical cables considering the size of the wiring hole on CAUTION the wall. • Upon wiring, use the provided U-type terminals (#16-22). When there are no terminals provided or •...
- Page 12 Installing the Wi-Fi Kit 6. Activate the Wi-Fi Kit. • When power is supplied, all indicators on the Wi-Fi Kit illuminate until the system boots completely. • After the system operates, tracking is performed automatically. 7. Tracking Tracking: The Wi-Fi Kit detects connected indoor unit(s) and the indoor unit(s) detects the connection to the Wi-Fi Kit.
-
Page 13: Setting The Indoor Unit Tenants For Each User
Setting the indoor unit tenants for each user • The multi-tenants feature allows you to control and monitor the indoor units with the group channel address (RMC1) that is the same as that of the Wi-Fi Kit. NOTE In order to selectively use the indoor units connected to a single outdoor unit by multiple users, you can install multiple Wi-Fi Kits and group the indoor units by setting the group channel address (RMC1) for each Wi-Fi Kit. - Page 14 Installing the Wi-Fi Kit for each Wi-Fi Kit. 2) One by one, select the MAC address for each Wi-Fi Kit from the list. - You can see the MAC address on the label inside the Wi-Fi Kit.
- Page 15 Installation Manual of the indoor unit. NOTE • To set the tenant address upon request, contact the Samsung service center. • To control all indoor units with different tenant addresses, make sure that all the Wi-Fi Kits are registered to the smartphone.
-
Page 16: Checking The Wi-Fi Kit
Installing the Wi-Fi Kit Checking the Wi-Fi Kit Power LED Wi-Fi connection LED Wi-Fi setting LED AP button Reset button <Front panel of the Wi-Fi Kit> Items on the LED display Item LED indication Wi-Fi connection Wi-Fi setting Initialized General AP connected, Internet connection incomplete Blinking Tracking completed,... -
Page 17: Initializing The User Data
LED display during tracking If communication is normal but there are only the indoor units with the central control disabled. • Reset the central control option on the indoor units. When the central control is disabled, the indoor units cannot be controlled with the Wi-Fi kit. Wi-Fi connection LED Wi-Fi setting LED Time... -
Page 18: Updating With A Micro Sd Card
Installing the Wi-Fi Kit Updating with a Micro SD card • Updating with a Micro SD card is only for installer. CAUTION Type Capacity File system Micro SD Max 4GB FAT16 Micro SDHC Max 32GB FAT32 1. Create a folder named “update" in the Micro SD card. Copy the latest software image and paste it into the folder created in the Micro SD card. -
Page 19: Checking The Power Connections
SmartThings app To use the SmartThings app, connect the product to the network in the sequence described below. The images shown may differ depending on your smartphone model, OS version and manufacturer. You need to set up the Wi-Fi access point only when connecting the product to a Wi-Fi network. Once the product is connected, you can use the SmartThings app via Wi-Fi, 3G, LTE or more wireless networks. -
Page 20: Downloading The Smartthings App And Registering Your Samsung Account
2. Registering your Samsung account • A Samsung account is required to use the SmartThings app. To create your Samsung account and log in to your account, follow the instructions displayed on the SmartThings app. You do not need to install an additional app. - Page 21 • If a pop-up window saying that the device is already registered appears during connecting to your product. • If a Samsung account-related country error occurs during connecting to your product, log out of your current Samsung account, log in to your previous Samsung account, and then delete all devices that have been connected previously.
-
Page 22: Controlling The Air Conditioner
Starting the system air conditioner app Controlling the air conditioner Below are functions that you can control or monitor using the Wi-Fi adapter. Category Function Description Desired Temp Displays the desired temperature. Current Temp Displays the current temperature. Monitoring Filter warning Defrost Appears in the defrost state. - Page 23 SmartThings app. To add the process. • If you are using a Samsung smartphone, the server may not be connected temporarily. Turn off and on the power of the Wi-Fi Kit, Adding I found a failure message in...
- Page 24 Troubleshooting Symptom Measure • The communication error is encountered between the indoor unit and Wi-Fi kit. Check the communication cables (F1/F2). • After installing the Wi-Fi kit, the addresses of the indoor/outdoor units may be changed. If the problem persists after checking the communication cable, keep the following steps: The SmartThings app displays the error number, 628.
- Page 25 It is also possible to obtain the complete corresponding source code in a physical medium such as a CD-ROM; a minimal charge will be required. The following URL http://opensource.samsung.com/opensource/WIFIKIT_R18_TZ4/seq/0 leads to the download page of the source code made available and open source license information as related to this...
- Page 26 Reference 1) FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 27 ICES-003 Issue 6 Samsung Electronics Co., Ltd. Manufacturer (Maetan dong) 129, Samsung-ro, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do 16677 Korea conforming to the applicable FCC Rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commission’s requirements.
- Page 28 COUNTRY CALL OR VISIT US ONLINE AT AMERICA www.samsunghvac.com...