Rengøring Og Vedligeholdelse - QNect SH-IPC02-QNE User Manual

ENG
1. LED status indicator
2. Reset button
3. Speaker
4. Microphone
5. USB Micro-B charge port
Reset
Press and hold about 6 seconds for
reset. LED flashes quickly.
Install and use
1. Download and install the app "QNECT
smart home" from Apple App Store or
Google Play Store on your mobile device.
2. Launch the app "QNECTsmart home".
3. Create a new account or log in to your
existing account.
4. Tap "+" to add the device.
5. Choose category and then the type of
product from the list.
6. Connect the device to power.
7. If the LED/lamp does not flash: Reset
the device.
If the status indicator flashes: Confirm in
the app.
8. Confirm the Wi-Fi network and
password.
9. Enter the device name.
Cleaning and maintenance
Do not use cleaning solvents or
abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the
device does not operate correctly,
replace it with a new device.
Clean the outside of the device using a
soft cloth.
2
Support
More product information can be found
at auroragroup.eu.
Contact us by e-mail:
smarthome@qnect.eu.
DK
1. LED-statusindikator
2. Nulstillings knap
3. Højttaler
4. Mikrofon
5. USB Micro-B-opladningsport
Nulstille
Tryk og hold nede i ca. 6 sekunder for at
nulstille. LED blinker hurtigt.
Installer og brug
1. Download og installer appen "QNECT
smart home" fra Apple App Store eller
Google Play Store på din mobilenhed.
2. Start appen "QNECTsmart home".
3. Opret en ny konto eller log ind på din
eksisterende konto.
4. Tryk på "+" for at tilføje enheden.
5. Vælg kategori og derefter
produkttypen på listen.
6. Tilslut enheden til strøm.
7. Hvis LED/lampen ikke blinker: Nulstil
enheden.
Hvis statusindikatoren blinker: Bekræft i
appen.
8. Bekræft Wi-Fi-netværket og
adgangskoden.
9. Angiv enhedsnavnet.
Rengøring og vedligeholdelse
Brug ikke rengøringsmidler eller
slibemidler.