Product Disposal; Warranty - Levita HT 600 Operating And Maintenance Instructions Manual

DEFECTS
The below stated table includes individual defect types and the manner of their repair. If you are not able to
locate the defect using this table, contact an authorized service company.
Warning: Prior to conducting any repair, disconnect the machine from power.
Defect
The hedge trimmer is
not working
The hedge trimmer does
not run continuously
The motor is running but
the blades are not
moving
Blades are excessively
heating up

PRODUCT DISPOSAL

Protect the environment! Do not dispose of this appliance in municipal waste. The product contains
electrical / electronic components. Improper handling of this type of waste could have a possible
negative impact on the environment and human health due to potentially hazardous substances that
are generally associated with EEE. According to the European Directive 2012/19/EU, electrical and
electronic equipment must not be disposed of in municipal waste at the end of its service life, but
must be disposed of in an environmentally friendly places for disposal. You will receive information about these
locations at the municipal office.

WARRANTY

The warranty period is stated on the purchasing document, minimum 24 months, beginning from the hand-over
of the device which has to be proven by the original purchasing document. Excluded from this warranty is normal
wear and tear of the product and its parts (i.e. gradual loss of battery capacity) and defects caused by disrespect
of the user's manual, use of non-fitting accessories, intervention of not authorized personnel or by repair with
parts that are not original parts of the manufacturer, use of force, strokes and breaking as well as mischievous
overload of the motor. In the event of a claim during the warranty period, contact your dealer together with proof
of purchase of the product.
Possible cause
There is no power, Defective
socket.
Fuse
Damaged electric cord, bad
internal contact
The ON/OFF switches are
defective
Internal defect
Dull blades
Notches on the blade
Excessive friction as a result
of insufficient lubrication
EN
Translation of the original instructions
Repair
Inspect the given power supply. Try a different
power outlet; replace the power outlet if
necessary.
Inspect the cable and, if needed, replace it
(contact an authorized service centre). Replace
the fuse.
Inspect the cable and, if necessary, replace it
(contact an authorized service centre).
Contact your supplier
Contact an authorized service centre.
Have the blades sharpened.
Inspect the blade edge.
Apply the maintenance spray.
18