AEI SIP BYOD Master User Manual page 16

NTP & Time Settings
Switch: (Default, Enable) Enable to synchronize the date & time
Primary Server:
Select from the listed servers in the drop box. If there is an intranet NTP server, select "User
defined" and then input the IP address of the NTP server.
Secondary Server:
The device will synchronize date & time with the secondary server if the primary server is down.
Select from the listed servers in the drop box. If there is an intranet NTP server, select "User
defined" and then input the IP address of the NTP server.
Location: Select the time zone from the drop down box.
Day Light: (Default, Off)
Daylight saving switch; enable to configure daylight saving date and time
Start:
Select what month (MM) of the year, what week (W) of the month, what day (DD) of the week
and what time (hh) of the day to start daylight saving.
End:
Select what month (MM) of the year, what week (W) of the month, what day (DD) of the week
and what time (hh) of the day to start daylight saving.
Sync Time:
Configure the period of time to synchronize the date and time with the NTP server.