Pioneer ELITE SC-LX901 Basic Manual page 20

> Before start > Hookup
BD/DVD
＊ Depending on the combination of speakers, you
may need to connect to other jacks. See "Points to
note with speaker combinations" (P9) for details.
1 Analog audio cable, 2 Speaker cable
20
> Setup > Playback
2
1
LINE
IN
ZONE 3 PRE/LINE OUT
> Part Names
ZONE 3 PRE/LINE OUT /
ZONE 3 SPEAKER
Along with the main room and ZONE 2, you can also
enjoy audio in yet another room (ZONE 3).
Connections with an AV component
To output the audio of an external AV component to ZONE
3, connect using an analog audio cable. Output to ZONE
3 is not possible when you connect with an HDMI cable or
digital optical/coaxial cable.
ZONE 3 PRE/LINE OUT
It is possible to play 2 ch sources in a separate room while
sources with a maximum of 11.1 ch are being played in
the main room. Connect the ZONE 3 PRE/LINE OUT
jacks of the unit and the LINE IN jacks of the pre-main
MAIN ROOM
amplifier or the power amplifier in a separate room with an
analog audio cable.
ZONE 3 SPEAKER
ZONE3
It is possible to connect speakers in a separate room and
play 2 ch sources.
0 You can play through a maximum of 7.1 channels in the
main room during ZONE 3 playback.
Setup
0 Settings are required in Initial Setup, "4. Multi
Zone Setup" (
ZONE 3 SPEAKER
P23) to enjoy this feature.
