Polaris RANGER XP 900 2017 Owner's Manual For Maintenance And Safety page 26

FEATURES AND CONTROLS
Switches
Light Switch
The ignition switch key must be in the ON/RUN position to
operate the headlights. Press the top of the rocker switch
toward the dash to place the headlights on high beam. Move
the rocker switch to the center position to place the headlights
on low beam. Press the bottom of the rocker switch to turn off
the headlights.
All Wheel Drive (AWD) Switches
Each model is equipped with an AWD switch that
controls the All Wheel Drive System. The type of AWD
switch used depends on the type of All Wheel Drive
system in your model.
AWD/Differential Lock Switch
The AWD/Differential Switch has three positions:
• All Wheel Drive (AWD)
• Differential Lock (2WD)
• Differential Unlock
See page 52 for operating instructions.
ADC Switch (if applicable)
The ADC switch has two positions (ON/OFF). ADC will
activate when all of the following conditions are met:
• AWD mode is engaged.
• No throttle applied.
• Vehicle speed is between 1-12.5 MPH.
• ADC switch is in ON position.
24
HIGH
LOW
OFF
AWD
Differential Lock
Differential Unlock
ADC Switch