Operations; Control Panel - Samsung WW70J4 Series User Manual

Operations

Control panel

01 Cycle Selector
02 Display
03 Temp.
04 Spin
05 Options
06 Delay End
07 Soak
08 Power
Start/Pause
09
WW70J4263MW_DC68-03755R-01-EN.indd 29
01
Turn the dial to select a cycle.
The display shows current cycle information and estimated
time remaining, or an information code when a problem occurs.
Press to change the water temperature for the current cycle.
Press to change the spinning speed for the current cycle.
• Rinse Hold (No indicator): The final rinse process is
suspended so that the laundry remains in the water. To
unload the laundry, run a drain or spin process.
• No Spin : The drum does not spin after the final drain
process.
Press to select an option from Intensive, Prewash, Rinse+,
Intensive + Prewash, Intensive + Rinse+, Prewash + Rinse+,
Intensive + Prewash + Rinse+. Press again to deselect.
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine's internal logic. For example, this setting is
useful for programming your machine to finish a wash at the
time you normally return home from work.
• Press to choose a preset unit of hours.
• Use this function to effectively remove stains from your
laundry by soaking your laundry.
• The Soak function is performed 13 minutes into the wash
cycle.
• The Soak function operates for 30 minutes with six cycles,
where one cycle is a soak cycle that spins for 1 minute and
stands still for 4 minutes.
Press to turn on/off the washing machine.
Press to start or stop operation.
02
03 04 05 06
08
09
07
English 29
2018/6/4 15:43:57