Volvo XC90 TWIN ENGINE Owner's Manual page 322

DRIVER SUPPORT
||
Related information
Cruise control (p. 317)
•
Change between cruise control and adap-
•
tive cruise control* in the centre display
(p. 327)
Selecting and activating cruise control
•
(p. 319)
Standby mode for cruise control (p. 320)
•
36 Cruise Control
320
Standby mode for cruise control
Cruise control (CC 36 ) can be deactivated and
set in standby mode. This can take place due
to driver intervention or automatically.
Standby mode means that the function is
selected in the driver display but not activated.
In this case, cruise control does not regulate
speed.
Standby mode on driver intervention
The cruise control is deactivated and set in
standby mode if any of the following occurs:
The foot brake is used.
•
The gear selector is moved to N position.
•
The clutch pedal is held depressed for
•
longer than 1 minute.
The driver maintains a speed higher than
•
the stored speed for longer than 1 minute.
The driver must then control the speed him-
self/herself.
A temporary increase in speed with the accel-
erator pedal, e.g. during overtaking, does not
affect the setting - the car returns to the last
stored speed when the accelerator pedal is
released.
Automatic standby mode
Automatic standby mode may occur if:
wheels lose traction
•
engine speed is too low/high
•
brake temperature is too high
•
speed falls below 30 km/h (20 mph).
•
The driver must then control the speed him-
self/herself.
Related information
Cruise control (p. 317)
•
Selecting and activating cruise control
•
(p. 319)
Deactivating cruise control (p. 319)
•
* Option/accessory.