PEUGEOT 3008 2017 Handbook page 96

Ease of use and comfort
Immediate switching on
F Press button 5 until the message "OK" is
displayed.
When the signal has been received, the
message "OK" is displayed along with the
operating time.
The heater starts and this symbol is
displayed.
This red indicator flashes during
heating.
F To deactivate the function, press button 4
until the message "OK" is displayed.
This symbol and the indicator lamp
will turn off.
94
During these operations, if the message
"FAIL" is displayed, it means that the
signal has not been received. Restart the
procedure after having changed position.
Adjusting the operating time
F Press the buttons 1 to display the operating
time.
This symbol will be displayed.
F After having displayed the operating time,
press buttons 4 and 5 simultaneously within
10 seconds.
This symbol will flash.
F Adjust the operating time by pressing
buttons 1: in 10 minute increments to a
maximum of 30 minutes.
F Simultaneously press buttons 4 and 5 to
save the operating time.
This symbol will be displayed.
The factory value setting is 30 minutes.
Deferred switching on
You must programme your departure time
for the system to automatically calculate the
optimal time to start the heater.