Distance Recorders - PEUGEOT 3008 2017 Handbook

Instruments

Distance recorders

The total and trip distances are displayed for
thirty seconds when the ignition is switched off,
when the driver's door is opened and when the
vehicle is locked or unlocked.
When travelling abroad, you may have to
change the distance unit: the display of
road speed must be in the official units
(miles or km) for the country.
The change of units is done via the
screen configuration menu, with the
vehicle stationary.
Total distance recorder
It measures the total distance travelled by the
vehicle since its first registration.
36
Trip recorder
It measures the distance travelled since it was
reset by the driver.
Resetting the trip recorder
F With the ignition on, press the button until
zeroes appear.
Instrument panel lighting
dimmer
Version with monochrome screen
Only works when the vehicle lighting is on
("night" mode).
It allows the brightness of the instruments and
controls to be adjusted.
F Press this button to adjust the
brightness.
F When the lighting reaches the
minimum setting, release the
button, then press it again to
increase brightness.
or
F When the lighting reaches the maximum
setting, release the button, then press it
again to decrease brightness.
F Release the button once the desired level of
brightness is reached.
Instrument panel ambient
lighting
Version with touch screen
It allows the instrument panel ambient lighting
to be switched on or off.
F Press this button.
The brightness of the instrument panel ambient
lighting is adjusted in the touch screen.